2KG PUR/EVA Glue Dispensing Machine for Edge Banders

Product Overview
Our 2KG automatic glue dispenser is a dedicated auxiliary unit designed to match woodworking edge banding machines, compatible with both PUR hot melt adhesive and EVA hot melt adhesive. Equipped with a self-cleaning glue pot, it resolves typical drawbacks of conventional glue supply systems: constant roller cleaning, excessive glue wastage, inconsistent melting temperatures and complicated glue changing procedures. Compact 2kg barrel design perfectly fits medium & small edge banding equipment, bringing stable gluing performance and easy daily maintenance to furniture panel production lines.

Core Product Advantages
1. Dual Adhesive Compatibility (PUR & EVA Switchable)
Supports seamless conversion between PUR and EVA glue. Clear standardized operation procedures for glue switching on the touch screen, with independent temperature parameter settings for two types of adhesives to avoid material deterioration and poor bonding.
2. Self-Cleaning Glue Pot
Built-in automatic glue removal function accessible via touchscreen parameter page (password protected). Customizable board quantity setting and glue removal delay prevent incomplete glue recovery during production; no manual disassembly cleaning required for glue rollers, greatly cutting downtime and labor cost.
3. Intelligent Touchscreen Operation System
Full-color touch control panel integrates startup preheating, glue change, parameter adjustment and fault prompt functions. Visualized step-by-step operation guides simplify training for workshop operators. The system auto-warms up glue plate & glue hose, with green indicator light to signal ready-to-work status (10–15 mins preheating cycle).
4. Stable & Safe Heating & Wiring System
Standard 220V power input (strictly prohibited for 380V connection). Separated temperature control wires and heating wires with fixed wiring labels avoid short-circuit or burnout. The glue pot shares the edge bander’s heating control logic, with aviation plug terminals for simple, error-proof wiring. Independent heating zones for glue tray, glue hose and glue pot support precise temperature regulation.
5. Simple & Fast Glue Replacement Process
Complete standardized glue change workflow on the touch panel: automatic barrel lifting, residual glue exhaust, pressure plate maintenance and glue barrel replacement. Equipped with exhaust device to balance internal barrel pressure and avoid glue overflow. High-temperature yellow grease lubrication for sealing rings extends service life of sealing components.
6. Adjustable Installation Structure for Universal Matching
Comes with fixed mounting bracket and U-shaped adapter plate compatible with most mainstream edge banders. Three adjustable screws control glue pot height; movable guide plate adapts to different panel processing requirements (higher for forward feeding, lower for backward feeding). A limit switch is pre-installed for safe automatic operation.

Key Technical Specifications
- Glue Capacity: 2kg barrel
- Power Supply: AC 220V (L live wire / N neutral wire / PE ground wire)
- Applicable Adhesives: PUR hot melt glue, EVA hot melt glue
- Recommended Temperature Parameters
  - EVA Mode: Glue tray ≈200℃, Glue hose ≈180℃, Glue pot ≈160℃
  - PUR Mode: Glue pot ≈140℃ (EVA heating switch turned off)
- Preheating Time: 10–15 minutes after indicator light turns green
- Air Pressure Requirement: 4kg working air pressure
- Control Mode: Full touchscreen intelligent control, password-locked parameter setting
- Matching Equipment: All standard woodworking edge banding machines

Standard Operation Workflow

1. Startup & Preheating

• Turn on main power supply and activate touchscreen system
• Set target temperature for glue plate and glue hose on screen
• Start heating switch, wait 10–15 mins until indicator light turns green
• Dispensing function is ready for formal production

2. Automatic Glue Removal (Self-Cleaning Function)

• Open main menu and enter parameter page
• Input access password: 6666 to unlock settings
• Set production batch quantity (1–2pcs for thin panels, 3pcs for multi-layer boards)
• Adjust glue removal delay to avoid incomplete glue recovery before board finishing
• System auto-recovers residual glue after batch processing, no manual roller cleaning needed

3. Glue Replacement Procedure

• Trigger barrel lifting program on touchscreen when low-glue alert flashes
• Lift pressure plate slightly, open exhaust valve to balance barrel internal pressure
• Fully raise the pressure plate, remove empty glue barrel
• Coat sealing ring with high-temperature yellow grease, install new glue barrel
• Lower pressure plate and lock handle, close exhaust valve to finish replacement

4. Switch Between PUR & EVA
- EVA to PUR: Fully exhaust leftover EVA glue, remove glue hose, empty all residual adhesive, then install PUR barrel and activate PUR heating parameters
- PUR to EVA:  Consume all remaining PUR glue first before loading EVA adhesive, enable EVA heating switch and adjust corresponding temperature values